bitchnblue09
Pro
Hey guys im hooking up my HID's and got a couple questions... theres 2 black wires, do they both go to seperate grounds ?? And does it matter where they go? I assume the red goes to the Battery... and Where is everybody mounting the Ballasts and the relay box??? Pics would be a great help.. Thanks alot... this is on a 09 XTX....
grizztracks
Tech Advisor
- Joined
- Feb 24, 2005
- Messages
- 3,110
- Age
- 60
- Location
- Scio, NY
- Country
- USA
- Snowmobile
- FX Nytro RTX, RS Vector, SR Viper RTX SE
I installed the Sled Start ballasts to the inside of the radiator shroud and grounded them to the radiator mounting bracket. The relay can be mounted to the back side of the speedometer pod which keeps it out of the weather. If you install a DDM set you can make mounting brackets and install them like I did.
http://s589.photobucket.com/albums/ss33 ... %20Tuning/
http://s589.photobucket.com/albums/ss33 ... %20Tuning/
Bahr05
Expert
I did the exact same mounting set-up as Grizz did. Worked just fine. I grounded my ballasts with the bolts that hold the bracket/airbox.
bitchnblue09
Pro
hid
I have sledstart hid's and does the red go to the battery positive side??? and i assume the 2 black ones go to 2 differant grounds???
I have sledstart hid's and does the red go to the battery positive side??? and i assume the 2 black ones go to 2 differant grounds???
sly23
Extreme
I mounted the ballast from sledstart on the outside of the thin plastics that will be on both sides of your headlights. Drilled 3 holes through the plastic, and bought stainless screw and locknuts. Looks real clean and does not rub on the the hood foams.
grizztracks
Tech Advisor
- Joined
- Feb 24, 2005
- Messages
- 3,110
- Age
- 60
- Location
- Scio, NY
- Country
- USA
- Snowmobile
- FX Nytro RTX, RS Vector, SR Viper RTX SE
I'd put the red on the battery side of the starter relay as shown in the diagram and the two blacks are grounds for each ballast.
bitchnblue09
Pro
hid
hey sly think you can post some pics of your mounts for your hid's
hey sly think you can post some pics of your mounts for your hid's
Daranello
Suspended
sly23 said:I mounted the ballast from sledstart on the outside of the thin plastics that will be on both sides of your headlights. Drilled 3 holes through the plastic, and bought stainless screw and locknuts. Looks real clean and does not rub on the the hood foams.
Me too, but I think your talking bout the Rad plastic side covers
nytro44
Newbie
Grizz. Just wondering which ddm kit u have?
natedawgedog
TY 4 Stroke Guru
heres the link to grizztracks hid install
http://www.ty4stroke.com/viewtopic.php? ... tracks+hid
http://www.ty4stroke.com/viewtopic.php? ... tracks+hid
nytro44
Newbie
Grizz. Just wondering which ddm kit u have?
nytro44
Newbie
Natedawg. Thanks for the reply.
torszula
Extreme
What is the difference between the DMM HID and SledStarts HID? There is a huge difference in cost so there must me something right? I paid over $200 for my HID's from SledStart! Tell me I got a better product. They look pretty much the same though!
natedawgedog
TY 4 Stroke Guru
sledstart probably has higher end components to it but ddm has replace the ballasts for my ford free of charge, they have great customer service and helped me out
Bahr05
Expert
My relay from DDM was junk right out of the box. Lights came on, and never shut off. I called them up and they sent a new one, no problems whatsoever. Seem to work, other than high beam appears to suck due to the reflector design of the headlight/headlamp.
Similar threads
- Replies
- 1
- Views
- 487
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.