How to make rx-1 wider

[Kyle farmboy]

Recently just bought an 03 rx-1 really noticed on any little bump or anything like that I’m one side or the other she really like to pick up kinda scary was wondering how to make the front end wider to make it more stable could I put apex a arms on it or the 05 rx-1 a arms heard the 05 was better than the 03 for that

 

[Indy]

the front end widening kit works, but makes it hard to fit in trailer with other sleds. My kit broke one a arm so I switched back. Are your a arms almost level to the ground? Has the links and sway bar been changed?

 

[Kyle farmboy]

the front end widening kit works, but makes it hard to fit in trailer with other sleds. My kit broke one a arm so I switched back. Are your a arms almost level to the ground? Has the links and sway bar been changed?

I don’t think sway bar has been changed I’m going to do that first after reading a bunch of stuff

 

[STAIN]

The wide front end kit is one of the best mods for these sleds in my opinion. Loved my 05 RX1 with a 45 inch front end. Super flat cornering.

 

[maim]

if the sway bar has small splined ends on it, it is origional and most likely the cause of the tippyness of your sled. up grading to a 12 mm bar would be the best solution. try travis at barn of parts for all the peices you need for the up-grade.

 

[Indy]

Are your a arms level or almost level? If not you have way too much shock pressure, this is an easy fix and doesnt cost anything.