I have a question about my Slydog powder hounds.

[billy2guns]

I used the rubber (boot) provided by Sly dog and I noticed it did not cover the width of the ski monting slot. I never thought much of it as it was a tight fit. After puting on some miles I noticed that the rubbers are all the way to one side leaving part of the spindle with no rubber under it. Does anyone else have or notice this problem? Or did Slydog send me the wrong ski rubber?

Thanks Guy's

 

[nytro addict]

I have no problems with mine. My guess is that they sent you the wrong one's.

 

[Zakre]

the rubbers that i got with my hounds fill the entire spindle width area under the spindle so you can offset them a half inch either way depending on how you put the spacers.

 

[yamadogg09]

one of mine has a small gap the other dosent

 

[Bpatch50]

power hounds

No problems with mine. Do yourself a huge favor - put the thick part of the rubber in the front and call Scott Bergstrom for shims and ski-savers. HUGE difference in the way they turn