RobX-1
VIP Member
- Joined
- Apr 13, 2003
- Messages
- 2,299
- Reaction score
- 1,483
- Points
- 1,583
- Location
- Coldwater, OH
- Country
- USA
- Snowmobile
- 18 50th Apex XT-X, 08 40th Apex LTX GT, 08 40th Nytro RTX, & 03 RX-1
When sync'ing the carbs on my RX-1, this is what I obtained from a prior post and use:
Base carb is # 3 in an RX-1. The throttle cable is connected to Carb #3. The bolt to adjust Carb #2 is right next to the throttle cable. That makes #1 on the PTO side and #4 on the mag side.
Base carb is # 3 in an RX-1. The throttle cable is connected to Carb #3. The bolt to adjust Carb #2 is right next to the throttle cable. That makes #1 on the PTO side and #4 on the mag side.
