Frostbite
TY 4 Stroke God
Guys, it is with much sadness that after a 8 years (Late Summer 2002-2010) adventure with my RX-1, I finally had to let the old girl go.
I was very torn about selling it my RX-1 but, I needed a beginners mountain sled and a TTR-125 for my 80 lb daughter and the sale of the RX-1 is what allowed me to do that.
I will miss hanging out on this forum as much as I once did and I have had a great time dealing with all of you and I'd still be happy to answer any questions I can regarding RX-1 issues.
I do have a few RX-1 items left that I need to get rid of:
I have a cut exhaust Y pipe ready for a single pipe to be welded onto it.
I have several sets of clutch weights all loaded up for a RX-1 mountain application. They are 8DN-00, 8DN-10, 8BU-10 and I also have two set of the 8FA-00 RX-1 stock weights.
I have a gold colored Dalton 54/42 helix that's in great shape.
Carbon print headlight cover
Blue traction brackets for the footwells
Apex mountain handle bars with hot grips and instructions for RX-1 application
Stock 16.5mm clutch rollers
Three sets of Holtzman carb springs - Yellow, Red and Silver.
One set of blue Handleballs - go into the end of handlebars to keep your hands from slipping off ends of handlebars.
Four chaincase gears - 18,19,22 and 40 tooth
2 RX-1 ski spindles (right and left) both slightly bent (can be easily straightened) with all bushings.
Take care guys, I will still be checking in from time to time.
Please send me a PM if you need any of this stuff.
Frosty
I was very torn about selling it my RX-1 but, I needed a beginners mountain sled and a TTR-125 for my 80 lb daughter and the sale of the RX-1 is what allowed me to do that.
I will miss hanging out on this forum as much as I once did and I have had a great time dealing with all of you and I'd still be happy to answer any questions I can regarding RX-1 issues.
I do have a few RX-1 items left that I need to get rid of:
I have a cut exhaust Y pipe ready for a single pipe to be welded onto it.
I have several sets of clutch weights all loaded up for a RX-1 mountain application. They are 8DN-00, 8DN-10, 8BU-10 and I also have two set of the 8FA-00 RX-1 stock weights.
I have a gold colored Dalton 54/42 helix that's in great shape.
Carbon print headlight cover
Blue traction brackets for the footwells
Apex mountain handle bars with hot grips and instructions for RX-1 application
Stock 16.5mm clutch rollers
Three sets of Holtzman carb springs - Yellow, Red and Silver.
One set of blue Handleballs - go into the end of handlebars to keep your hands from slipping off ends of handlebars.
Four chaincase gears - 18,19,22 and 40 tooth
2 RX-1 ski spindles (right and left) both slightly bent (can be easily straightened) with all bushings.
Take care guys, I will still be checking in from time to time.
Please send me a PM if you need any of this stuff.
Frosty