• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

l.e.d. lite barr on front bumper of a 2014 sr viper ltx

bot

bot

Extreme
Joined
Aug 17, 2016
Messages
52
Age
38
Location
ottawa
Country
Canada
Snowmobile
2014 viper long track
Does anyone have a l.e.d barr hooked up to front bumper on there viper......i seen a lad near bancroft with one hooked upto his artic cat... he said it made a world of diffrence and he had it hooked up to run with his high beams.... i d like to do this for my gf's 2014 viper with a 6" single row l.e.d barr from black dimond xtreme.... my question is..... how hard is it to feed the wires back to to batt under seat...and how do u go about hooking it to ur highbeams..?... is it a big job , do u gotta tare the sled apart? ...thanks for any info on this!
 

I have two 4" cubes on my skins bumper and works really good. It's pretty easy to run all the wires to the battery and I hooked the trigger for the relay to the high beams. You will have to take all of the panels, hood and the seat off to run the wires. Here's my setup. And this is the plug I tapped into for the high beams. The plug is right next to the reverse beeper.
6439b433965f9cca9c1a5dba14db1798.jpg
24698ea652fabbab5167ae5e75ee28c1.jpg
02732e73a5dd25bd083edaefa4af8dab.jpg



Sent from my iPhone using Tapatalk
 
Do you have to remove the head like and cowel ..thxs a million
 
bot said:
Do you have to remove the head like and cowel ..thxs a million
Click to expand...
I had to remove the whole hood assembly but I never took the headlight off of the hood assembly.
 
Did u have to tear sled apart.. like head lite and the dash console...or just side panels and hood..thnks
 
DirtBikeKid what headlight bulbs are you running? Look much brighter than stock


Sent from my iPhone using Tapatalk
 
Just be careful going too bright! I have a pair of 30* "flood" degree 18 watts (~2500lm) on my front bumper and it casts quite a bit of light up close which actually hinders distance vision since your pupils close up. I tried a set of 15* "narrow" ones too and those still cast a lot of light in the near field, so much so that I just went back to the 30* for more filler light in off trail conditions. I angled each pair so the had a slight overlap, covering 60*x 30* and 30*x 15*. Another note, the BRACKETS will crack on the Ebay specials, right were the bracket bolts to your bumper if you don't install a large HD washer under the bolt head.
 
What lite bar is that tapapex..what lite bars do u guys recomend..
 
Dirtbikekid1998 said:
I have two 4" cubes on my skins bumper and works really good. It's pretty easy to run all the wires to the battery and I hooked the trigger for the relay to the high beams. You will have to take all of the panels, hood and the seat off to run the wires. Here's my setup. And this is the plug I tapped into for the high beams. The plug is right next to the reverse beeper.
6439b433965f9cca9c1a5dba14db1798.jpg
24698ea652fabbab5167ae5e75ee28c1.jpg
02732e73a5dd25bd083edaefa4af8dab.jpg



Sent from my iPhone using Tapatalk
Click to expand...
What headlights are you running. I want to replace my halogens. Also, what is the brand for the two led cubes on the bumper?
 
You must log in or register to reply here.

Similar threads

x2thez
Need to replace front Pivot on 2014 LTX
Replies
1
Views
299
RobX-1
RobX-1
cannondale27
  • Sticky
Viper Frequently Asked Questions
Replies
0
Views
81K
cannondale27
cannondale27


Back
Top