ontarioyamaha
Pro
- Joined
- Mar 26, 2017
- Messages
- 150
- Reaction score
- 26
- Points
- 363
- Location
- Port Perry, Ontario
- Country
- Canada
- Snowmobile
- 2010 Vector ltx GT
2010 MXZ X 1200
- LOCATION
- Port Perry
Finished up front end, set up exactly as per Catman. Every adjustment was out to lunch, max setting on clickers, no preload on springs.
Now I am pulling apart the rear skid and I am finding much the same, missing rear cable and the shock is set to max clicker and max preload. The transfer rod was out well beyond max. I also noticed that the limiter strap has been in every conceivable position.
I want to place in stock positions to continue on Catmans setup. Does anyone know where its is when stock?
Now I am pulling apart the rear skid and I am finding much the same, missing rear cable and the shock is set to max clicker and max preload. The transfer rod was out well beyond max. I also noticed that the limiter strap has been in every conceivable position.
I want to place in stock positions to continue on Catmans setup. Does anyone know where its is when stock?
thor452
Because I can
- Joined
- Jan 5, 2010
- Messages
- 3,029
- Reaction score
- 621
- Points
- 1,603
- Location
- Shawano,WI 54166
- Country
- USA
- Snowmobile
- 2012 Apex XTX 2017 Sidewinder LTX-LE
most always is 1 hole in from full out
