mirrors for '05 Rx1

[wingr1800]

I have a new to me '05 RX1. Wondering what mirrors anyone has installed. So far this year using a handlebar mirror, which works, but don't get heat where the strap is. I also want it to grab more in cornering. Tighten up springs on skis? Don't want to mess with limiter stap if not needed. I am using Woody's dual runners, 4".

 

[YammyRX1]

I have 6" Woody Doolies and they work well, but a lot of people swear by Snowtrackers.

 

[Yooper_Bob]

I have yamaha mirrors part # 8CR-W2628-00-00

They work really well. Tuck in behind the corners of the windshield.

 

[maim]

make shure the a-arms are parallel to the ground 1st. next check the toe. should be toed out 1/4" at the front measuring from the carbide studs. if running stock skis, add 1/8-1/4" shim to the rear of the ski rubber if it has not been done already.

now comes the personal preference. I like steering so I would suck up the limiters 1/2" to keep the skis down. if it still pushes in the corners, it might be conditions or you need a more aggressive ski than stock. mountain skis are a cheap upgrade and they dig through and turn great.

 

[wingr1800]

Got the Kimpex mirrors on tonight. It took most of the evening. They didn't come with any instructions though. This is the set that is made for Yamaha and has a metal bar that mounts under the dash and goes from one side to the other. Now I want to put the bar end hooks on.