I just changed the belt on my 06 Nytro for the first time, 4850 miles. Now, when the sled is idling, the belt squeals unbelievably. It seems that the same thing happened to a guy I know's Vector last year. It doesn't happen until the sled warms up, and then only when sitting at idle. Any thoughts?
gsxr
TY 4 Stroke Master
- Joined
- Feb 24, 2006
- Messages
- 1,338
- Reaction score
- 62
- Points
- 1,008
- Location
- BRACEBRIDGE , ONTARIO
- Country
- Canada
- Snowmobile
- 2023 SRX
Pull 1 small washer from each 8mm head bolt(3) on the back of the secondary clutch , belt is riding too high (effectivly to short ).
Why didn't I think of that? Makes sense, thanks.
revster
TY 4 Stroke God
- Joined
- Aug 18, 2004
- Messages
- 1,752
- Reaction score
- 17
- Points
- 923
- Location
- La Salle MB
- Country
- Canada
- Snowmobile
- 2009 Yamaha Nytro RTX SE
Did you give it a nice soap water bath before installing it? I had the same thing with my Vmax years ago, a guy told me to wash them before installing and I've been doing it ever since. <not saying that's your problem tho>
06nytrorider
Extreme
Mine did the same thing after about 500 miles it went away.
IFlyEm
Expert
It will go away. Mine went away after a couple hundred miles.
900 miles last weekend and its still there, not as loud, but still there. I was going to remove some shims, but we never stopped long enough!IFlyEm said:It will go away. Mine went away after a couple hundred miles.

Cruizin
Extreme
Waiting for the squeal to go away instead of removing shims just means your wearing the belt down prematurely. Bite the bullet and remove the shims, it only takes a few minutes.

big-d
VIP Member
remove the washers and that should cure it
whitedust1
TY 4 Stroke God
- Joined
- Jan 10, 2008
- Messages
- 1,626
- Reaction score
- 411
- Points
- 1,208
- Location
- Waterford ,WI
- Country
- USA
- Snowmobile
- 2012 Apex XTX
That is your deflection telling you that the belt is too tight. Yam does not have easy deflection adjustment so I would tend to wear belt in. Me I try to pick up used belts with no flat spots & go another 3000 miles as fit better & no adjsutment. Some people ask dealers to change belts every year with 200 miles on them. I buy them from used parts dealer as used part for like $10 instead of belts being thrown out.
Similar threads
- Replies
- 7
- Views
- 1K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.