New Billet Adjusters from JT Products (Sabercat)

[MrSled]

JT Products

These will replace the plastic adjuster on the rear axle of the Vipers, Sidewinders with billet high quality adjusters blocks.

 

[RAMSOMAIR]

How about the piece that goes in the rail that the adjuster bolt goes into?

 

[sabrecat]

How about the piece that goes in the rail that the adjuster bolt goes into?

That's what this is. This replaces the cast aluminum adjusters on ends of axle. It is not a replacement for the plastic spacer. This fits 2012-18 and the long track 19's. Will come standard on JT trihub replacements kits and the heady duty all four wheel kits.Will fit all older JT kits and as well as the stock axles with trihub. $50.00 a set.

Todd

 

[RAMSOMAIR]

Thanks Todd, I have 2 of your axle kits for the SW and the Viper. I’m not referring to the end on the axle, but the threaded part that fits into the rail. The cheap stock cast ones are prone to breaking.

 

[SideHogger]

Thanks Todd, I have 2 of your axle kits for the SW and the Viper. I’m not referring to the end on the axle, but the threaded part that fits into the rail. The cheap stock cast ones are prone to breaking.

I'm with ya RAMSOAIR, does anybody make a replacement for the threaded part?

 

[sabrecat]

I'm with ya RAMSOAIR, does anybody make a replacement for the threaded part?

I had not heard to much about them failing until lately. Is it mostly the 19-20's?

Might need to look into making billet ones.

 

[SideHogger]

I had not heard to much about them failing until lately. Is it mostly the 19-20's?

Might need to look into making billet ones.

I think its just another spot to offer something that is going to last and strengthen a weak point. Dont know personally of any failures but I think they would sell and you could sell them together or separately.