New RX1 Crankcase Vent

G Man

Newbie
Joined
Feb 2, 2004
Messages
17
Reaction score
0
Points
551
Location
Ontario
Here's a pic of the block of an '05 RX1 that decided to launch the mag side con rod! Yikes!
G Man
 

Attachments

  • rx10 motor (2).jpg
    rx10 motor (2).jpg
    166.3 KB · Views: 346
Any thoughts on the cause?
 
Buckeye said:
Any thoughts on the cause?
All we know is the con rod cap is sticking out the hole (see pic) and the bolts are nowhere to be seen. Con rod bolts either broke or were loose and backed out. Not allowed to dis-assemble it. Have to crate it and return it to You-Know-Who! They did give us a drop-in to replace it. Also, the debris punched a hole in the tunnel and exchanger and we have to replace that also! Not fun.
 
Sasquatch said:
Dealer told me a guy in Kenora didn't tighten drain plug, lost all the oil motor went bang. Is that the one?

No, not the same one. Lots of oil etc... in unit. Mechanical failure.
 
I heard on this site that all the Mach Z's were blowing up, but didn't know all the RX1's were also blowing up.
 


Back
Top