Nytro MPI Blower with Remapped ECU at sea level

[snowmaaan]

Does anyone have any experience with the MPI reprogrammed ECU on a nytro stage I kit? I spoke to them this past week and am planning to do this, however DONT want to sacrafice reliability. I am currently running a 27 top and 28 bottom setup (5 ish lbs) and am told with this repflashed ECU that I can run 9-10lbs on pump gas.

Again, I trail ride and want performance but reliability is key for me!! My sled is an 09 xtx with an excel header and Ultra Q muffler and Ulmer Clutching.

Thanks!

 

[waldo1]

I run a yamai kit with 26 28 combo with no ecu reflash - no issues - with the reflash - can go higher maby 26 29 - the reflash is the way to go - thanks matt

 

[snowmaaan]

Thanks for the response. Matt suggested a 25/29 combo putting it at 9.5lbs of boost. However, given I don't have a cooler on mine and don't have the pulleys suggested, I opted to run it as is. It runs really well and has been incredibly reliable so with 200hp, so running it another year as it is.

Thanks!

 

[full tilt viper]

ecu

About to re install my new remapped ECU toady ! Went with full update including the hand warmers. I.m running 25x29 pulley combo and with this reflash I should be spot on . I do have the MTX cooler as well. I was running ethanol free 91 with no problems 9-10 lbs boost. I know I was right on the line so I just pulled my cluthing down to 8600 got be to sit at 7 which I could deal with . Now I hope to raise up the rpm again 8800 and raise up the HP !

 

[snowmaaan]

Any updates on the ECU remap? Still interested in doing mine!