journeyman
Lifetime Member
- Joined
- Nov 27, 2005
- Messages
- 2,021
- Age
- 61
- Location
- Prior Lake, Mn.
- Country
- USA
- Snowmobile
- 2007 Attak GT
- LOCATION
- Prior Lake,MN
Other than the current arctic spell it never go started here. Lowest snow fall in 30 plus years.
ROCKERDAN
OCD Sledhead
- Joined
- Oct 8, 2005
- Messages
- 7,503
- Location
- Huntsville Ontario & Niagara NY
- Country
- Other
- Snowmobile
- '18 RTX 50th "Winder"
Terry, you may want to post that nice video you have of this clutch and the easy adjusting ect....
Also, I believe Terry mentioned Dalton weights(which most of us have in our stock primary) will fit into the pro4.
Dan
Also, I believe Terry mentioned Dalton weights(which most of us have in our stock primary) will fit into the pro4.
Dan
Crossfire12
TY 4 Stroke Guru
- Joined
- Feb 13, 2017
- Messages
- 884
- Age
- 68
- Location
- New York Adirondacks
- Country
- USA
- Snowmobile
- 2010 Z1 Turbo ,2017 zr9000, F1100 turbo, 700 srx
- LOCATION
- Sacandaga reservoir
Clutch looks good being a 3 arm, have you heard or tested if there is any harmonics setting off knock? Like STM 3 arm? I am interested in buying one but I want to make sure. How much does it weigh? Thanks
Keith Schmitz
Pro
I haven’t had any problems...i believe it weighs the same as the AC team primary.
- Joined
- Apr 14, 2003
- Messages
- 6,539
- Location
- Hessel, Michigan
- Country
- USA
- Snowmobile
- Sidewinder, SR Viper XTX, SR Viper XTX, 2016 Apex XTX and Pro-Line Pro Stock 1000
- Joined
- Apr 14, 2003
- Messages
- 6,539
- Location
- Hessel, Michigan
- Country
- USA
- Snowmobile
- Sidewinder, SR Viper XTX, SR Viper XTX, 2016 Apex XTX and Pro-Line Pro Stock 1000
Crossfire12
TY 4 Stroke Guru
- Joined
- Feb 13, 2017
- Messages
- 884
- Age
- 68
- Location
- New York Adirondacks
- Country
- USA
- Snowmobile
- 2010 Z1 Turbo ,2017 zr9000, F1100 turbo, 700 srx
- LOCATION
- Sacandaga reservoir
Nospro to install on AC 9000 what belt and different clutch puller?
- Joined
- Apr 14, 2003
- Messages
- 6,539
- Location
- Hessel, Michigan
- Country
- USA
- Snowmobile
- Sidewinder, SR Viper XTX, SR Viper XTX, 2016 Apex XTX and Pro-Line Pro Stock 1000
Install on 9000 the same as the winder, 105 ft. lbs. to seat the clutch, back off and then 48 ft. lbs.
To remove the clutch requires a special puller from Pro 4 Performance.
Belt, you can run whatever belt you wish and the clutch will be setup for that belt. Most of the winder guys are running the stock 8JP or 8DN
To remove the clutch requires a special puller from Pro 4 Performance.
Belt, you can run whatever belt you wish and the clutch will be setup for that belt. Most of the winder guys are running the stock 8JP or 8DN
STAIN
Lifetime Member
- Joined
- Feb 29, 2004
- Messages
- 4,196
- Location
- Vermont
- Country
- USA
- Snowmobile
- 2022 SIDEWINDER LTX GT
- LOCATION
- Vermont
Do you have these in stock?
Crossfire12
TY 4 Stroke Guru
- Joined
- Feb 13, 2017
- Messages
- 884
- Age
- 68
- Location
- New York Adirondacks
- Country
- USA
- Snowmobile
- 2010 Z1 Turbo ,2017 zr9000, F1100 turbo, 700 srx
- LOCATION
- Sacandaga reservoir
Can I run the wider cat belt? Don’t care for the narrower belt, See nothing on your web site, how do you order?
ROCKERDAN
OCD Sledhead
- Joined
- Oct 8, 2005
- Messages
- 7,503
- Location
- Huntsville Ontario & Niagara NY
- Country
- Other
- Snowmobile
- '18 RTX 50th "Winder"
REDLINE 1
Expert
Any updates on the pro 4 primary? Any others running it?
Tcat100
Expert
Also consider the Tapp, it's a four arm with no weights or spring to buy separately for $1400. I have approximately 4500 miles on it and it's still tight everywhere. Food for thought
DooZ
TY 4 Stroke Junkie
View attachment 153252
Oh he is because this is what his Team looks like
Attachments
Last edited:
actionjack
TY 4 Stroke God
- Joined
- Apr 9, 2005
- Messages
- 2,511
- Location
- Westminster, Maryland
- Website
- www.inspectorjack.com
- Country
- USA
- Snowmobile
- 2017 SideWinder LTX-LE
Oh those Team clutches are the bomb! 
