problems with T.O.R.S after ck10er plug install anyone?

[rage man]

i was just wondering because after i installed these in my rs rage last year ever once in a while the tors would avt up the sled off and all i did was shut it off restart it and drive away never knowing why the tors came on in the first place but i was reading the owners manual to my new nytro the other day and i seen where it said do not install any thing other than the cr9 plugs or it could affect the tors so i guess i found out why mine was acting up last year but just wondering if anyone else has had a problum with there tors and cant figure it out and has the cr10 plugs installed

 

[Grimm]

Interesting, I didn't catch that in my manual until you mentioned it. Thanks, you just saved me $30.

 

[Budweiser]

This is the first I've heard of it. My Vector had those plugs in with over 6000 miles and no problems...

 

[buddah]

Hmmm........strange........I've run the cr10ek's in BOTH my 03 RX-1 and my 06 Nytro for 2 full seasons with no ill effects........and the Nytro is virtually the identical motor to your.......?????

 

[Grimm]

...except for fuel injection...hmmm

I never heard of anyone having problems running them in their Apexes.

 

[rage man]

i havent either but that is what was going on with my rage it must just be something rare but i dont know how plugs would affect the tors ? owell i didnt like them anyway

 

[fsyamaha]

Yamaha has had problems with CDI's giving TORS problems. Mostly 2005's. Their is a 90 code on all 2005's for a CDI replacement. If you aren't sure check with your dealer with your serial number to make sure it was done. Andy

 

[Mighty]

Kinda off topic but the 10's are too cold for the 3 cylinders. For the 4's they are already 1 heat range below what Yamaha calls for. 2 Ranges lower on the triples.
FYI: CK9'ERs are available for the same price. I have bought both 9 and 10's at Murray's auto and advance auto for about $5.00 each.