RPM and boost are low
- Thread starter nytrozula
- Start date
FLYBYU
VIP Member
Then you might as well do the fuel upgrade.
Sent from my 831C using Tapatalk
Sent from my 831C using Tapatalk
full tilt viper
Pro
- Joined
- Dec 25, 2009
- Messages
- 142
- Reaction score
- 18
- Points
- 988
- Location
- Ontario
- Country
- Canada
- Snowmobile
- Nytro MPI Stage 1
27tx28b will give you on a very cold day 6.5 lbs at 8900. Run it around -5 same clutching wont pull the rpm 8600 which pulls down boost to 5.5 . If you want 7-8 lbs you need a 29b. been there done that it is bang on 7.7-8 lbs. I run in southern ontario at 350'
Full Tilt- you are spot on! 27t/28B is exactly what you say. 6.5lbs!!!! I was told that 27/28 would get me to 10 and its not even close. I guess i'll need to get a 29 for the bottom and run 26t/29b and hopefully get close to 10.
full tilt viper
Pro
- Joined
- Dec 25, 2009
- Messages
- 142
- Reaction score
- 18
- Points
- 988
- Location
- Ontario
- Country
- Canada
- Snowmobile
- Nytro MPI Stage 1
27x29 will give you close to 8 with good rpm. 25x29 which i ran on my old sled will give you a solid 9-10
FLYBYU
VIP Member
Like it says though! 8900 RPM. If you don't get that first your going to chase your tail. Been there done that.
Sent from my 831C using Tapatalk
Sent from my 831C using Tapatalk
