Paydirt
Newbie
2012 RS Vector Gauge Relocation Bracket
I added a 2 inch pivoting bar riser to my Vector that made seeing the gauge cluster rather difficult. My brother in law bent up a stainless bracket to reposition the gauge. Its bent at 30deg. I will test it at that angle but I think 20-25 degrees will work out better. The whole headlight pod disassembles rather easily and the stock wiring is plenty long. No modification to the dash was necessary so I can convert it back to stock at anytime.
Paste this link in your browser to see my photos.
https://picasaweb.google.com/BobsGradin ... directlink
I added a 2 inch pivoting bar riser to my Vector that made seeing the gauge cluster rather difficult. My brother in law bent up a stainless bracket to reposition the gauge. Its bent at 30deg. I will test it at that angle but I think 20-25 degrees will work out better. The whole headlight pod disassembles rather easily and the stock wiring is plenty long. No modification to the dash was necessary so I can convert it back to stock at anytime.
Paste this link in your browser to see my photos.
https://picasaweb.google.com/BobsGradin ... directlink
4strokeluvr111
Please stay between the markers!
- Joined
- Aug 27, 2011
- Messages
- 2,154
- Reaction score
- 338
- Points
- 1,263
- Location
- NW Wisc.
- Country
- USA
- Snowmobile
- Bought a new 05 Vector which I still have
24K miles
Nice job...very clean!
Irv
TY 4 Stroke God
- Joined
- Mar 23, 2005
- Messages
- 3,778
- Reaction score
- 44
- Points
- 1,233
- Location
- ONT. Canada
- Country
- Canada
- Snowmobile
- 2008 40th Anniversary Vector.
1995 XLT SP (Son's)
X2. looks nice4strokeluvr111 said:
