RX1 ATTACK tracks

[PAYNER67]

I have a 2005 RX1 in need of a track and have found a nice one off a 09 Attack - will it fit ? both are the same size just not sure about pitch and dont know how to measure for it

 

[kinger]

Yep it will fit. Although if I were doing a track change the last thing that I would put on it would be the rip saw. Look into a cobra or carve unless your getting it dirt cheap.

 

[grader]

rx1 121inch track, attak has a 136 inch track. will need extensions to work.

 

[MrSled]

rx1 121inch track, attak has a 136 inch track. will need extensions to work.

Other then that length, it will be just fine on the RX1 with a 136 ext. I have had great luck with the Rip Saw. Cobra is to soft for me and ripped apart.

 

[kinger]

I wouldn't be quick to generalize with a sample of 1. On my 250 hp sled the cobra looks new after almost 2500 miles and I am not easy on it as the spin is hard to control on pavement, etc.

Where as I have personally seen 6 ripsaws shred in front my eyes in less then 3000 miles on mostly stock sleds.

Thought he said length was the same in his orginal post?? I assumed he had a warrior and just left off the warrior or something.

 

[MrSled]

I wouldn't be quick to generalize with a sample of 1. On my 250 hp sled the cobra looks new after almost 2500 miles and I am not easy on it as the spin is hard to control on pavement, etc.

Where as I have personally seen 6 ripsaws shred in front my eyes in less then 3000 miles on mostly stock sleds.

Thought he said length was the same in his orginal post?? I assumed he had a warrior and just left off the warrior or something.

Difference of opinions... my 230 hp sled ripped that cobra track apart in less then 1000 miles and the I have had several ripsaw tracks on lower HP sleds with zero problems. To each his own ... to many factors for the difference of opinions.

Ill tell you this, I wont spend $600 plus dollars on the Cobra track to get burned again... 1 bad track is still a bad track. I also stud my tracks and maybe that's the weakness.

 

[rxwarrior]

I agree with Mr.Sled, I will take a Ripsaw over a Cobra any day.