Anyone know if this part of the fuel tank is solid (white x)? I'd like to put a hole in it to run Afr wiring.
sloan188
Expert
- Joined
- Nov 28, 2012
- Messages
- 255
- Reaction score
- 21
- Points
- 323
- Location
- Vaudreuil, QC
- Country
- Canada
- Snowmobile
- 2005 Polaris Fusion 900
2009 Nytro XTX
2010 Ski Doo GSX LE 1200
No first hand knowledge here but based on post 227 on page 16 it looks like it is...
http://www.ty4stroke.com/threads/2012-ak-sled-build.111935/page-16
http://www.ty4stroke.com/threads/2012-ak-sled-build.111935/page-16
Cool - thanks!
edge_232
Expert
- Joined
- Jan 15, 2014
- Messages
- 254
- Reaction score
- 25
- Points
- 388
- Location
- Madison WI
- Country
- USA
- Snowmobile
- 2011 Nytro MTX slowly being modded
2005 IQR Trail Converted
Don't do it! That part of the tank is where to top & bottom are seemed together. I trimmed that same spot on my trail tank to improve the fit & caused a leak. I had to plastic weld it back together to stop the leak. It looks like that's the stock tank so it might be different but I doubt it. So if you do drill be careful & be aware you might be buying another tank. If you do need one I have a stock tank. Best of luck but I would find another route.
I routed my AFR wiring under the tank due creating a small dented channel in the tunnel so the wire wouldn't get pinched. Worked well for me.
I routed my AFR wiring under the tank due creating a small dented channel in the tunnel so the wire wouldn't get pinched. Worked well for me.
Sask Attak
Expert
I ran my wiring beside the tank with the factory taillight wiring.
