AaronBND
TY 4 Stroke Junkie
Another question me being the amateur that I am. I have the Hartman clutch setup and have been really happy with it, but out riding today a buddy of mine and I switched sleds doing some hill climbing and he said mine felt really weird. He said it was like the track was just spinning way to fast when going up the hills. I always thought this was just all the torque they produce, but now I am wondering if 80 degrees is just to hot. What do most mountain guys run for hill climbing and deep powder? I have to say his was alot smoother running up the hills. It just seems like mine is over-the-top to peppy. His was just alot smoother engine to track speed wise. I don't know??? When I first cluthed it, I was at 60 degrees and just wasn't that impressed. Then I went to 80 and was histatic at the power. I did feel my belt and clutches after riding hard and they were both just warm. Not even close to hot, so I figured that was good! Any ideas? Thanks.
Aaron
Aaron
Turbo Tim
TY 4 Stroke Master
Sounds like you have it right to me . I think factory setting is 70.
what is your rpm's when your making a climb.
AaronBND
TY 4 Stroke Junkie
I think around 10,500 or so! Not really sure cause when I pin it, it pulls the front-end up. Not so good going up steep hills! I'm never at full throttle pulling hills except in really deep stuff.
Aaron
Aaron
Try 70 if you don't like it go back to 80 degree's.
