Rukus
VIP Member
- Joined
- Dec 9, 2018
- Messages
- 34
- Reaction score
- 13
- Points
- 438
- Location
- Ontario
- Country
- Canada
- Snowmobile
- 2017 Sidewinder XTX SE
2012 Phazer RTX
2000 Venture XL
2013 Nytro XTX
2012 Nytro XTX push turbo
New to me 2017 Sidewinder. Previous owner installed new primary around 2000km ago. I know this topic has been beat to death but today did around 100km, was pretty warm out so I had my visor up for most of the ride. The thing rattles like crazy from idle to about trail cruising speed. When I really crack on it I can't hear it probably due to exhaust sound.
Some threads I've read say if it's the primary it should stop rattling with RPM. Does that point to something else making the noise or has anyone else noticed the rattle at trail cruising speed? I've owned 2 nytros, a phazer and a viper and none were this loud.
Thanks!
Some threads I've read say if it's the primary it should stop rattling with RPM. Does that point to something else making the noise or has anyone else noticed the rattle at trail cruising speed? I've owned 2 nytros, a phazer and a viper and none were this loud.
Thanks!
74Nitro
VIP Member
- Joined
- Feb 18, 2013
- Messages
- 5,652
- Reaction score
- 4,262
- Points
- 1,853
- Location
- Dublin Ontario
- Country
- Canada
- Snowmobile
- 2019 Sidewinder LTX
The easiest option is the powerblock clutch from Umatek. However, they are currently sold out.New to me 2017 Sidewinder. Previous owner installed new primary around 2000km ago. I know this topic has been beat to death but today did around 100km, was pretty warm out so I had my visor up for most of the ride. The thing rattles like crazy from idle to about trail cruising speed. When I really crack on it I can't hear it probably due to exhaust sound.
Some threads I've read say if it's the primary it should stop rattling with RPM. Does that point to something else making the noise or has anyone else noticed the rattle at trail cruising speed? I've owned 2 nytros, a phazer and a viper and none were this loud.
Thanks!
Rukus
VIP Member
- Joined
- Dec 9, 2018
- Messages
- 34
- Reaction score
- 13
- Points
- 438
- Location
- Ontario
- Country
- Canada
- Snowmobile
- 2017 Sidewinder XTX SE
2012 Phazer RTX
2000 Venture XL
2013 Nytro XTX
2012 Nytro XTX push turbo
As long as I know it's the primary and it's normal I'm happy.The easiest option is the powerblock clutch from Umatek. However, they are currently sold out.
74Nitro
VIP Member
- Joined
- Feb 18, 2013
- Messages
- 5,652
- Reaction score
- 4,262
- Points
- 1,853
- Location
- Dublin Ontario
- Country
- Canada
- Snowmobile
- 2019 Sidewinder LTX
Yes, it's normal.As long as I know it's the primary and it's normal I'm happy.
Rukus
VIP Member
- Joined
- Dec 9, 2018
- Messages
- 34
- Reaction score
- 13
- Points
- 438
- Location
- Ontario
- Country
- Canada
- Snowmobile
- 2017 Sidewinder XTX SE
2012 Phazer RTX
2000 Venture XL
2013 Nytro XTX
2012 Nytro XTX push turbo
As long as I know it's the primary and it's normal I'm happy.The easiest option is the powerblock clutch from Umatek. However, they are currently sold out.
Thank you.Yes, it's normal.
Rukus
VIP Member
- Joined
- Dec 9, 2018
- Messages
- 34
- Reaction score
- 13
- Points
- 438
- Location
- Ontario
- Country
- Canada
- Snowmobile
- 2017 Sidewinder XTX SE
2012 Phazer RTX
2000 Venture XL
2013 Nytro XTX
2012 Nytro XTX push turbo
Just want to verify the is normal off idle as well, at higher rpm as well?Yes, it's normal.
74Nitro
VIP Member
- Joined
- Feb 18, 2013
- Messages
- 5,652
- Reaction score
- 4,262
- Points
- 1,853
- Location
- Dublin Ontario
- Country
- Canada
- Snowmobile
- 2019 Sidewinder LTX
At idle and also part throttle up to about 5500 then it goes away past that.Just want to verify the is normal off idle as well, at higher rpm as well?
Warren Silliker
Veteran
- Joined
- Feb 23, 2016
- Messages
- 35
- Reaction score
- 31
- Points
- 623
- Location
- New Brunswick
- Country
- Canada
- Snowmobile
- 2021 Sidewinder SRX
Hurricane noise reduction ring works wonders.
I have had the original design Hurricane noise reduction shaft for many years and clutch is still quiet with very little roller wear.
Similar threads
- Replies
- 114
- Views
- 29K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
