SnowTrackers on the X-TX Mountain Skiis?

sideshowBob

Lifetime Member
Joined
Nov 16, 2009
Messages
2,268
Reaction score
2,707
Points
1,563
Location
North West Ontario
I am considering installing a set of Snow Trackers on my 2019 X-TX LE that has the Mountain style skiis like the BTX and Mountain SWs.
Has anyone tried this combination?
 
It sounds backwards to do that, but there is no reason you cannot, as they should take any standard wear bar combination designed for the hole location.

I say backwards, as off trail folks don't worry too much about carbide. I, on the other hand, like the floatation of the mountain ski, but need the bite of a good carbide as i trail ride mostly. But I loose minimal turning performance with that ski.

So I run the Apex Mountain Skis with Woodys Doolies for years and they have performed well. this isn't your exact question, but I think it applies. Be sure to shim the ski to spec of course.
 
Yes, they fit. I run the aggressive on my xtx.
 
I ran these skis with agressive trackers for a couple years on mine. I found them to work fine.
BTW, I would sell these powder skis now if anyone is looking. Blue with yellow handles.
 
The SW I just bought has pilot 6.9s with snow trackers. I realize not the same but still a wide ski. They handle the trail really well.
 
I've ran them for years. Good floataton, aggressive keel. Any preference of runners per your riding style works on and off the trail.
 


Back
Top