Snorover
Expert
- Joined
- Apr 15, 2003
- Messages
- 366
- Reaction score
- 5
- Points
- 893
- Location
- Kittery/Fayette,Maine
- Country
- USA
- Snowmobile
- 2017 Viper
It was working when I last started it and now, when I started my maintenance before putting it away for the summer, the unit is out completely


Viper? Tail light work? If not fuse.

74Nitro
VIP Member
- Joined
- Feb 18, 2013
- Messages
- 5,495
- Reaction score
- 4,164
- Points
- 1,853
- Location
- Dublin Ontario
- Country
- Canada
- Snowmobile
- 2019 Sidewinder LTX
I don't have a Viper, but on my Winder I had the dash go out while riding once and it turned out to be a relay.
Snorover
Expert
- Joined
- Apr 15, 2003
- Messages
- 366
- Reaction score
- 5
- Points
- 893
- Location
- Kittery/Fayette,Maine
- Country
- USA
- Snowmobile
- 2017 Viper
Thanks, yes the tail light does not light, so I guess it is the fuse.
It would be nice if you could get to the fuse box without taking the sled apart. Right now I am stumped, I was able to get all the side panels off and most of the hood however I can't find the connection in front of the light where the hood is held on. At this point its all about cussing out the cat engineers. HELP!
It would be nice if you could get to the fuse box without taking the sled apart. Right now I am stumped, I was able to get all the side panels off and most of the hood however I can't find the connection in front of the light where the hood is held on. At this point its all about cussing out the cat engineers. HELP!


Two bottom front,One left and right side near upper a arm and one left and right under side panel lip.
Vmax
Expert
- Joined
- Mar 20, 2018
- Messages
- 487
- Reaction score
- 237
- Points
- 658
- Location
- Lasalle
- Country
- Canada
- Snowmobile
- 2023 ZR 6000
Two bottom front,One left and right side near upper a arm and one left and right under side panel lip.
So nice to have a experienced guy on this forum...
Carla 123
TY 4 Stroke Junkie
- Joined
- Feb 27, 2017
- Messages
- 541
- Reaction score
- 245
- Points
- 838
- Location
- Lester beach
- Country
- Canada
- Snowmobile
- 2015 viper xtx boosted
17 zr9000 precision stage 3
Move the fuse box ,lots of info on this great forum how to do it,1 panel off Bingo right there on top of clutch guardThanks, yes the tail light does not light, so I guess it is the fuse.
It would be nice if you could get to the fuse box without taking the sled apart. Right now I am stumped, I was able to get all the side panels off and most of the hood however I can't find the connection in front of the light where the hood is held on. At this point its all about cussing out the cat engineers. HELP!
Similar threads
- Replies
- 8
- Views
- 841