SnoAngel
Veteran
Could anyone walk me through setting up my sled. I have had a chance to ride hardpack trails over the last few weeks and I find the sled requires a lot of effort to steer through the tight stuff. It reminds me of a long track I once had. The steering seems light when entering smaller corners but needs to be muscled to get it to turn in hard when there is any load on the front end.
As I am new to this sled I am not familiar with how the front reacts to changes in the rear skid. I could trial and error it, but hoping someone here can give me a few hints.
I weigh in a 220(ish after the holidays) Stock skis - new ripsaw track begining of season and 96 woodys
Thanks in advance
As I am new to this sled I am not familiar with how the front reacts to changes in the rear skid. I could trial and error it, but hoping someone here can give me a few hints.
I weigh in a 220(ish after the holidays) Stock skis - new ripsaw track begining of season and 96 woodys
Thanks in advance


nate007
Lifetime Member
- Joined
- Dec 25, 2006
- Messages
- 2,770
- Reaction score
- 60
- Points
- 1,333
- Location
- Iowa City, Iowa
- Country
- USA
- Snowmobile
- 1. '06 Apex -twin screw
2. '04 Redline Revolt 800
3. '09 Nytro XTX - twin screw
Try posting this in the RX-1 section. You may have better luck with someone being able to help you over there. This thread is for "show and tell".