Studded 1.5" track fitment question

[fxnytrortxkid]

I would like to update my sled to the c&a xtx ski an 1.5" track for next year. Anyone had any exsperiance studding a 1.5" track on a nytro? Are smaller drivers required to stud it? Assuming smaller drivers. An I've heard many diff versions of just tracks. Haven't heard any studded.

Thanks

 

[Tyloooor]

did you look at the cobra 1.6" with studs in lugs?

I was thinking of a 1.5" track next winter and wondered about studding it...

 

[fxnytrortxkid]

I thought about it but cobras have very soft lugs an they don't make a 128" version but ya I have thought about it. Kinda wondered if there's enough adjustment to make a 129" work with 8" rear idlers and oversized idlers up front.

 

[Tyloooor]

there aren't too many 128 1.5" tracks.....

 

[ALuCsRED]

I changed out the drivers for 9 tooth extrovert Wahl drivers and a 1.5" intense track. The track rubbed on the front heat exchanger protectors. I ended up cutting off the protectors to have reasonable clearance.

I wouldn't try studs on a 1.5" track with these drivers. You may have to try an 8 tooth driver.