dirk_03
Expert
I am going to be putting a mpi supercharger kit on a vector engine. Wondering how the jetting works with the supercharger? Is stock jetting used? Does it need to be rejected for elevation changes? I tired searching and have not found anything. Likely call mpi this week to see if I can get some install instructions for the vector.
Riceburner
Lifetime Member
- Joined
- Apr 14, 2003
- Messages
- 1,760
- Reaction score
- 123
- Points
- 1,158
- Location
- N.B. Canada eh
- Country
- Canada
- Snowmobile
- SideWinder LTX 50th
Not sure on Vector but my SC RX 1 had to go down 3 sizes on the mains for the same elevation.
Ratpack
Expert
- Joined
- Oct 11, 2006
- Messages
- 427
- Reaction score
- 4
- Points
- 873
- Location
- Frewsburg NY
- Country
- USA
- Snowmobile
- 2003 RX1
You will have to play with it. Start with the stock jetting and let your AFR gauge tell you what to do. I am running stock jetting in my RX1. That is at sea level. When I go to the mountains I run 130's. The elevation is 8600-12000.
Similar threads
