TD Race map question

See n blue

Expert
Joined
Dec 10, 2013
Messages
247
Reaction score
125
Points
783
Location
East
Country
Canada
Snowmobile
2017 LTX
Anyone know what’s required to run this map besides fuel pump, CAI, exhaust and map sensor? Is a fuel pressure regulator and are head studs required? what is the best rpm to spin it to?
 
Last edited:
Wastegate locker too anyone know what kind of boost a locked wastegate puts out?
 
Who’s Tom? We’re trying to get my buddies set up for a last race just not sure how much he needs to do
what type of racing r u setting up for ? clutching and gearing needed with that kind of boost
 
500ft then radar runs 1000ft
 
500ft then radar runs 1000ft
I would think 21/41 for 500ft drag racing , 21/38 for 1000ft radar or 22/37 , 41-35 helix , black /tan spring at 70 degrees , 8jp belt , black /green spring , start with 85 grams and adjust to maintain 9000-9100 rpm
 
I would think 21/41 for 500ft drag racing , 21/38 for 1000ft radar or 22/37 , 41-35 helix , black /tan spring at 70 degrees , 8jp belt , black /green spring , start with 85 grams and adjust to maintain 9000-9100 rpm
What weights are you happy with?
 
What weights are you happy with?
im using stock Yamaha clutches with dalton weights and springs and helix , im not a drag racer , u might want to look at stm weights , they seem to work better for drag racing from what I have seen
 
im using stock Yamaha clutches with dalton weights and springs and helix , im not a drag racer , u might want to look at stm weights , they seem to work better for drag racing from what I have seen
What Daltons are you running?
 
DTYA 2s are not enough for the race map.
 


Back
Top