Alex
Newbie
hi guys. Im new here and i tried to find my answer but didnt find anything.
I got 2 good deal for a new track and im not sure avout the fitement.
So i have a 06 mtx with a 16x162x2.25 and i would like to know if any of these 2 track will fit. The first one is a 15x163.2.5 (challenger extrem)
And the second one is 15x162x2.6 (powder claw)
Thx
I got 2 good deal for a new track and im not sure avout the fitement.
So i have a 06 mtx with a 16x162x2.25 and i would like to know if any of these 2 track will fit. The first one is a 15x163.2.5 (challenger extrem)
And the second one is 15x162x2.6 (powder claw)
Thx
- Joined
- Jun 1, 2004
- Messages
- 7,734
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
they should fit if the driver pitch is the same as what you have. mtx sleds came with a 3 pitch from the factory if memory serves.
Alex
Newbie
they should fit if the driver pitch is the same as what you have. mtx sleds came with a 3 pitch from the factory if memory serves.
Ok thx and a 163 should fit even if i need a 162 ?
- Joined
- Jun 1, 2004
- Messages
- 7,734
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
yes it should. just means you have to adjust the rear axle back further to get the tension on it.
HighSpeedLowDrag
Pro
163" track needs 2.86" pitch drivers. 162" tracks are 3" pitch on stock MTX apex.
Alex
Newbie
I guess the guys was wrong he tell me it was a 3.00 pitch so i wont take that one. Thanks !163" track needs 2.86" pitch drivers. 162" tracks are 3" pitch on stock MTX apex.