Hurulau
Newbie
- Joined
- Oct 29, 2015
- Messages
- 21
- Reaction score
- 4
- Points
- 63
- Location
- Finland
- Country
- Other
- Snowmobile
- -15 Viper XTX LE (mcx270)
How tight you high boost (mcx270 etc) xtx owners run your track? My track is much tighter than in specs but still jumping over the drivers.
Are you positive it's not actually your chain ratcheting?How tight you high boost (mcx270 etc) xtx owners run your track? My track is much tighter than in specs but still jumping over the drivers.
Mike P
Lifetime Member
- Joined
- Nov 18, 2015
- Messages
- 564
- Reaction score
- 276
- Points
- 808
- Location
- Berlin CT
- Country
- USA
- Snowmobile
- Sr Viper R-TX SE
- LOCATION
- Berlin CT
Last year what felt and sounded like my track jumping ended up in a chain case failure. It went on for a few hundred miles and I was checking track tension the morning before the chain case went. I unfortunately never thought to check the chain tension, could have saved me a lot of trouble. Yamaha did fix it under warranty but I had to finish the season on an Apex-SE.How tight you high boost (mcx270 etc) xtx owners run your track? My track is much tighter than in specs but still jumping over the drivers.
Hurulau
Newbie
- Joined
- Oct 29, 2015
- Messages
- 21
- Reaction score
- 4
- Points
- 63
- Location
- Finland
- Country
- Other
- Snowmobile
- -15 Viper XTX LE (mcx270)
Hmm ok... Chain is adjusted finger tight then 1,5 turn loose. Is that too loose for turbo?
According to some yes it's too loose. If it ratcheted you will need to look for damage in chaincase.Hmm ok... Chain is adjusted finger tight then 1,5 turn loose. Is that too loose for turbo?
Similar threads
- Replies
- 22
- Views
- 10K