Tuner Skis

Curtis24

Newbie
Joined
Oct 8, 2013
Messages
1
Reaction score
0
Points
31
hey guys, just curious about who's running what setup on the Tuner Skis. Have a 2015 Apex 128" and am an aggressive trail rider. Was thinking of going with the 4" inside and 2" outside. What do you's think???
 
Last edited:
I think you have a 128 if its a 2015 and carbides on tuners is and endless possibility I think yamaha hit a home run and after spending when it came to this ski design. your set up will be fairly good lots are leaving no carbide on i think outter and 4 inch inner I cant keep up I do not like them skis at all I hope you dont have to invest too much money finding a set up that will work for you.
 
i run dual 6" woody's on my tuners but i'm studded. i found those were more aggressive compared to the Yamaha 6" carbides. i got a little darting when they were new that i didn't have before but they got better as they wore a little. i'm thinking of going to a 6" inside and a 4" woody's on the outside when these need to be replaced otherwise i like them, better then the stock skies that were on it with the cobra carbides
 
Last edited:
6" bergstroms or shaper bars in the middle, 4" straight runners on the outside. Hang on!
 
I have a 11 xtx and a 12 se Apex both have tuners on with 10 inch John Master carbide. 1800 miles on each and still in great shape
 
I think mine are 6" and 4" and work well. One thing about the power steering is that you can have more carbide and still turn it easily. Good luck.
 


Back
Top