Ulmer clutch question

[ski_bum]

I am installing a stage 1 clutch kit on my nytro from ulmer, I am using my stock spring on my secondary, the instructions on his website say to use holes 3 on the secondary and 6 on the helix when replacing the stock spring. Just making sure this is the same if using the stock spring! Thanks!!

 

[ski_bum]

Gotter figured! Thanks

 

[Srxspec]

No, those will not be the correct holes for your stock secondary spring. Use the holes that are listed on the clutch spec sheet in the bag with the weights.

 

[dboe03]

Look at that service!