Ulmer stage 1

[97sx700]

I have a 09 Nytro RTX. I have installed the Ulmer stage 1 clutch kit with 144 studs. My issue is I dont think im hitting the right rpms. At WOT i on pull 8560 i dont think this is right. Does anyone else have this setup? And what should the rpms be? Thought i would ask before calling Alen. Plus im only get 89mph i did hit 92 once but that was and felt like the i ran the entire Turtle Flowage. Suggestions Please. Thanks Nick

 

[raginyamaha]

call ulmer, he stands by his product and will help you with any questions you have.

 

[YamahaFreak]

Best Bet would to call Allen, the kit comes with many washers you can add to the weights. Maybe you need adjusting??

 

[mike3577]

Sounds like u need to remove some weight from the tips to get your rpm up a bit

 

[97sx700]

Thanks for you input, talked to Allen and was told to take the weight out of the tip! Should only be pulling 8600 to 8800 rpms.