stock
Pro
Can some one tell me what the #'s are on the secondary for a 6-3 setting I cant tell what they are on the clutch side. Never did a Yamaha clutch before. Thanks,Dave
NB-NYTRO
TY 4 Stroke Junkie
its "3" on the clutch and "6" on the helix.
stock
Pro
I cant tell what the # 's are on the clutch 1-2-3-? Are they in order clockwise ? I can tell they are different locations but dont know were 3 is .Thanks ,Dave
stock
Pro
can some one post a pic of were the #'s are on the clutch ?thanks
stock
Pro
any one ?
Ulmer has pics with detailed instructions on his instructions on his website not for the nytro yet but it's the same concept.
stock
Pro
The casting of my clutch is not good so I can not tell were the numbers are . I do know what hole was stock so if that is # 3 I will use that . I will try to call him later this morning maybe he knows .
- Joined
- Apr 17, 2003
- Messages
- 5,348
- Location
- Menno, SD
- Website
- www.ulmerracing.com
- Country
- USA
- Snowmobile
- 2014 Yamaha SR Viper LTX, 2014 Yamaha SR Viper RTX SE, 2015 Yamaha SR Viper MTX SE 162 (turbo), 2015 Yamaha SR Viper MTX SE 153
- LOCATION
- Menno, SD
- WEBSITE
- www.ulmerracing.com
1, 2, 3 counter clockwise is how it is stamped in the clutch. The OEM spring setting in the secondary is 2.
NB-NYTRO
TY 4 Stroke Junkie
stock said:
The casting on mine was bad too. I had to put it up to my face and use flash light to make it out. I could only make out two numbers.. the three and the one. the molds must be getting bad.
akdavo
Extreme
My casting was horrible as well, very rough finish with some harsh wear marks. Worried me a little when I first saw it. I have been told by so many people not to mess with my clutching. But have also read so many good posts about the improvements. Don't know what to think.
