Under Tunnel Exhaust Plans

[hibshman25]

Just some info for those building nytro undertunnel exhausts. The nytro header exit is offset from the center line. Vector headers do not have the offset exit, so if building a custom exhaust you can have the muffler centered if you use a vector header. They fit right up to the flex pipes. The vector exit does not flare up to the larger OD like the nytro header does. It's a little smaller so don't plan your muffler and adapter until you have a vector header in hand.

 

[NytroMisfit]

Good info thank you snobird

 

[NytroMisfit]

Just some info for those building nytro undertunnel exhausts. The nytro header exit is offset from the center line. Vector headers do not have the offset exit, so if building a custom exhaust you can have the muffler centered if you use a vector header. They fit right up to the flex pipes. The vector exit does not flare up to the larger OD like the nytro header does. It's a little smaller so don't plan your muffler and adapter until you have a vector header in hand.

I was planning on cutting and rewelding pipe to header to straighten it

 

[thor452]

careful that you dont have ti header

 

[NytroMisfit]

Ti? Titanium?


Im pretty sure stock headers are just stainless

sent using my personal communication device

 

[thor452]

yes not too up on Nytros but the apexes were ti