Viper idles but dies

[Yamaharx-1]

we rode all day and coming home on trail my 15 viper died. It starts and idles but dies when you give it gas. No check lights or codes but the oil light did show.
Any ideas?
Thanks

 

[ksiesel]

Throttle override switch. My guess is that the switch at the pivot of your throttle lever isn't working correctly or your throttle cable is incorrectly adjusted.

 

[yamamarc]

Fast check for tps is going in troubleshooting mode on gauge
Find the tps section and make sure it's at
0%

 

[cannondale27]

Fast check for tps is going in troubleshooting mode on gauge
Find the tps section and make sure it's at
0%

http://ty4stroke.com/threads/guage-operation-videos.147610/#post-1355769

 

[yamamarc]

http://ty4stroke.com/threads/guage-operation-videos.147610/#post-1355769

One other thing to do is check with steering all the way to the right then left and center
When I had stalling issues my tps% was 4% when cranked right but 0% in the left and center position
Make sure to press throttle and release to get proper reading... it might show 0% but once you press throttle and release it might show a different %