mcamzr
TY 4 Stroke Guru
It came off the extension at the bottom rad mount bolt and fell inside and of course it's not a deepwell. I've got a ton of 10mm sockets (seems everything I everything is 10mm) I just don't want to leave it in there.
nitris223
TY 4 Stroke Junkie
- Joined
- Nov 18, 2012
- Messages
- 589
- Reaction score
- 32
- Points
- 778
- Location
- Yorkton Saskatchewan
- Country
- Canada
- Snowmobile
- Yamaha Nytro MTX
Just trying to think what is down there. All I can think of is a starter and the header on the back side, front side would be the throttle bodies. Could it have fell into the header area under the heat shield. I know it is hard to see in there. Not a lot of room around that engine to begin with. Do you have a extendable mirror and shine a flash light on it so you can see into places not otherwise able to.
Beenba
TY 4 Stroke Junkie
- Joined
- Feb 16, 2011
- Messages
- 579
- Reaction score
- 14
- Points
- 723
- Location
- Ontario
- Country
- Canada
- Snowmobile
- 2009 Nytro XTX
I dropped one in one time. Take the belly pan off and rock ur sled back and forth real good. It popped right out for me!
mcamzr
TY 4 Stroke Guru
That is my next plan. Though I think it fell down next to the header by the tunnel cooler hoses but who knows
mcamzr
TY 4 Stroke Guru
Found it!! Only after taking off the skid plate, tank and airbox did I find it wedged on the throttle bodies. Thanks again for the help
