what polaris track fits the phazer

[edgeracer1]

so i want a bigger track for my sled and i know some of the guys are running polaris tracks and just wanted to know what sled they are off of.If i remember they are from the 04 proxr 440 but just want to make sure

 

[marpolsdofer]

so i want a bigger track for my sled and i know some of the guys are running polaris tracks and just wanted to know what sled they are off of.If i remember they are from the 04 proxr 440 but just want to make sure

AC SP 600 (XC) has the same track the phazers do but its a little bigger. Ripsaw- 128" long and 1.25" lug

 

[edgeracer1]

128 long stock there 121 how are they using those

 

[snofreak500]

The Camoplast Freeride is a 1.5 inch track made for the phazer in 121 and 144 and its pretty agressive if thats somthing your interested in im not sure...

 

[edgeracer1]

i know about the freeride but i know someone who has some polaris snox tracks

 

[snofreak500]

hey keep me posted on what you find out cause i wouldnt mind a track like that for mine

 

[marpolsdofer]

128 long stock there 121 how are they using those

As it did last year, Arctic Cat produced snocross and cross-country versions of the 2010 600 Sno Pro to serve the requirements of all terrain racers and circuits. The snocross Sno Pro has a 15- by 128- by 1.7-inch Camoplast track, Peak Torque Limiting (PTL) driveshaft system to reduce chain and belt failures caused by hard landings and 9-tooth drivers, C&A Pro skis, a 7-gallon fuel tank. The clutches and suspensions are tuned for the unique demands of snocross racing.

The cross-country Sno Pro runs on a 1.25-inch RipSaw track; a dash-mounted choke cable; 11-gallon fuel tank; the new ACT skis; 10-tooth drivers on the standard (non-PTL) driveshaft; a dash-mounted speedometer/tachometer; standard snow flap; and taller mid-height windshield. Both versions of the 600 Sno Pro are equipped with VForce Reeds, remote-reservoir Fox IFP shocks and TEAM Industries driven clutch.

I have the rip aw on my SP 600 128x15x1.25

 

[marpolsdofer]

Look at track here
http://www.powersportsuperstore.com/Pro ... lick=35177

 

[edgeracer1]

what im wondering is how do you put the 128 in the phazer

 

[marpolsdofer]

I am pretty sure someone has a extension for it.

 

[marpolsdofer]

Could always look in this
http://www.tracksusa.com/rail_extensions.html

 

[yamahas]

Would you be able to set the skid back to accommodate a bit of a longer track? I can't imagine there is much more track touching the snow with a 121 vs. a 128.

 

[marpolsdofer]

Dont forget it has .25 longer lug then the pahzer

 

[snopro442]

I am running a 1.75 pro x track on my 07 phazer fx works great,

 

[rhino_live]

there's clearance for that?! what the crap? i thought 1.5 was as deep a lug as you could fit in the tunnel.