Polly
Veteran
I have the CAMOPLAST predator track. What should I be looking for. The 03' is a new non-current
sledheadgeorge
TY 4 Stroke God
TOO MANY NIPPLES AND NOT ENOUGH MILK LOLOLOL
LazyBastard
TY 4 Stroke God
"camoplast predator" doesn't mean very much. The 03RX is a camoplast predator 9855. The camoplast predator 9833 was a really nice track (for a 121).
The problems are as follows;
1) Not nearly enough grip to deal with the motor on an RX1. You pin the throttle on a freshly groomed trail and it would sit there spinning for a few seconds before it would hook up.
2) There were some quality control issues with them. Not all were affected and there's no way to tell which ones were affected, BUT, some of them fell apart really early.
On a smaller sled, like a 600cc, they're an EXCELLENT track. I have mine on my Exciter, and it has perfect hookup. I had to go with something wild to get the RX to hookup decent (see signature below), though a 9833 or even a shorter camoplast ripsaw 99x3 will do pretty good as well.
The problems are as follows;
1) Not nearly enough grip to deal with the motor on an RX1. You pin the throttle on a freshly groomed trail and it would sit there spinning for a few seconds before it would hook up.
2) There were some quality control issues with them. Not all were affected and there's no way to tell which ones were affected, BUT, some of them fell apart really early.
On a smaller sled, like a 600cc, they're an EXCELLENT track. I have mine on my Exciter, and it has perfect hookup. I had to go with something wild to get the RX to hookup decent (see signature below), though a 9833 or even a shorter camoplast ripsaw 99x3 will do pretty good as well.
SledVentures
Newbie
1500 miles and it tore. Terrible hook up, poor quality. Glad to be rid if it!
