White skid plate

[Cc440]

Looking for a white rear skid plate. Anyone know if the arctic cat 7000 rear skid plate is the same as the viper?

 

[sk-rx1]

I believe it will fit. Not 100% though. Was going to get one but decided to stay with blue. Directions for the Yamaha plate specify English drill sizes for a few holes, definitely not a Yamaha product.

 

[wacker]

I tried the arctic cat white off of a 7000 or so they said it was from a 7000 and didn't fit the profile of the nose cone in the front so i took it back it just didn't look right

 

[Nytro40th]

I tried the arctic cat white off of a 7000 or so they said it was from a 7000 and didn't fit the profile of the nose cone in the front so i took it back it just didn't look right

the front may not fit but the rear may

 

[sk-rx1]

I would be pretty certain the front plate would not fit, but thinking the rear will. I bought an AC sport bumper, fits OK but the front is flat across where the Yamaha is pointed. I'm thinking it looks OK, will get it installed and decide for sure.

 

[YamahaFreak]

Will the rear Skid Plate off a cat fit the Viper? Cause I also want a white one

 

[yamahaguy]

I am certain the AC white skid plate will fit no problem. I did the same thing with the orange and white skid plate our XTX Vipers. Check out my album for pictures.

 

[YamahaFreak]

I am certain the AC white skid plate will fit no problem. I did the same thing with the orange skid plate on my XTX Viper. Check out my album for pictures.

Which Arctic Cat sled is the same as the Viper? Is it the 7000?

 

[yamahaguy]

Which Arctic Cat sled is the same as the Viper? Is it the 7000?

Yes. 7000

 

[yamahaguy]

We bought a orange and white one from AC . Same installation directions same hardware kit just a different color plastic as the yamaha skid plate.



http://www.ty4stroke.com/threads/xt...id-plate-on-the-le.130309/page-3#post-1174689

 

[tapex_07]

I have the white Cat skid on mine. "Bolted" right up. I also have the front in white, but it's not on yet.. on a side note, I do have the Cat vented hood panels on too. So the front plate should fit no problem as well.