vicman
Extreme
Im extending my 06 RTX. I have 2 tracks, a 1.25 144 ripsaw and a 1.75 144 backcountry. My question is what will I need to do to make the 1.75 fit my sled? One of the tracks will be for sale as soon as I decide which one I am going to use.
Newfie Apex
Expert
- Joined
- Mar 3, 2010
- Messages
- 356
- Reaction score
- 6
- Points
- 303
- Location
- Mt. Pearl Newfoundland
- Country
- Canada
- Snowmobile
- 2008 Nytro
track
I did a 121-144 extension on my buddies 40th apex. All I had to do was remove the tunnel protetors and the protectors on the front heat exchanger..After that there was enough clearance all around for the 1.75 backcountry track...Do a search for phazernut...this is the guys sled..Craig has since moved on and bought a turbo cat and sold the 40th..
Larry
I did a 121-144 extension on my buddies 40th apex. All I had to do was remove the tunnel protetors and the protectors on the front heat exchanger..After that there was enough clearance all around for the 1.75 backcountry track...Do a search for phazernut...this is the guys sled..Craig has since moved on and bought a turbo cat and sold the 40th..
Larry
copo427ss
TY 4 Stroke Junkie
Yup, you have to remove the front exchanger guards. My 1.5 just barely fits with them in. Or you could go to smaller drivers
vicman
Extreme
Dreams_of_Apex
Extreme
- Joined
- Dec 26, 2012
- Messages
- 52
- Reaction score
- 1
- Points
- 66
- Location
- Ottawa/West Carleton, Ont
- Website
- www.facebook.com
- Country
- Canada
- Snowmobile
- 2012 Summit SP 800r ETEC.
vicman said:
Looks good! this is exactly what I am looking to do to mine in the off season, was it a PIA to make the 1.75 fit? Did you change the drivers, or only remove the tunnel and Heat Exchanger protectors?
Also for the 7" Powder hounds how do you like them? Think the 8" are overkill, unless a true mountain sled?
Newfie Apex
Expert
- Joined
- Mar 3, 2010
- Messages
- 356
- Reaction score
- 6
- Points
- 303
- Location
- Mt. Pearl Newfoundland
- Country
- Canada
- Snowmobile
- 2008 Nytro
track
Only had to remove the tunnel and front heat exchanger protectors....Stock drivers...It is close but it fits!!!
Only had to remove the tunnel and front heat exchanger protectors....Stock drivers...It is close but it fits!!!
vicman
Extreme
I only removed the tunnel protectors really wasn't anymore difficult than changing a track beside a few minutes with a cutoff wheel. By far the best thing I've done to the sled. I can actually hook up now. The traction I gained alone was well worth the money not to mention it going to float better in the deep stuff especially with the 7" powder hounds I put on.
