Search results

One idea might be to block off and weld the exhaust shut where the exhaust exits now. Figure out what size pipe you would want and drill that size hole coming straight down out of the bottom of the muffer so it would go straight down into the tunnel. Drill that a hole in the muffler so you...

find a good used 15 wide x2 inch track and cut it down. You can pick up a good used 144 x 2 track for like $250 or so. Trick is to turn the track inside out so the flat edge is on the table saw bench. Then cut just enough thru the track (not all the way thru the lugs with the blade). Its...

Anyone know if the Phazer chaincase gears are 13w 15 spline gears? I'm gonna have to switch from a 17 tooth to a 19 tooth and I need to know if my 19 tooth 13w 15 spline gear will work. This might have been covered before search function isn't the greatest with 3 letter words...

Hey I got bought a set of shocks that the actual plastic rebound cilcker adjuster is stripped out. Anyone know the part number on these, or where I can get a set of these? Don't know if they make billet ones, I'd take billet or plastic ones, don't care?

I have a 151 phazer track and extensions if your interested? I'd have to take it off the sled. The track is like new, 151 challenger cut down to fit and rail extensions. Pm me if your interested.

everything depends on elevation your running at. At 10000 ft you can get away with less octane and if you take the same sled down to 1000 ft your gonna need some really good fuel to ensure it doesn't pop!

Anyone off hand know what the primary spring rate of a stock 07 phazer gt is? I'm adding 25hp nitrous shot to my sled and from what I've heard some of these phazers are borderline on hitting the rev limiter at WOT. Was gonna do a little searching and get a spring w/10-15lbs more finish rate in...

nitrous mount Thanks for the help... Emailed you! BTW: Like the quote at the bottom!! ONE A MARINE ALWAYS A MARINE!!! 2nd Tracks, 2 MARDIV, Camp Lejeune, NC 2000-2004 Amtrac's! Hope this pic loads! Little pic of us getttin back at Saddam!

Picked up a used boondocker nitrous kit, and was wondering where everyone was mounting the nozzle at in the airbox? Few pictures would help. Thanks!!

I'd go with a skinz rear bumper just like the look of em. $120/or so not a bad deal for it. http://www.atvparts.biz/store/merchant. ... mper-skinz Or Ebay has a stock one forsale: http://cgi.ebay.com/ebaymotors/NEW-YAMA ... ccessories

$20/3lb refill in cooke city, mt and they kinda have high prices for anything in town. Ran it a 50hp shot on my M7..... boy was that a mistake, now I got a turbo, lol. Soon as you get that first perma-grin from it, you want more. Anyone know the biggest shot you can run on a Phazer? I got...

So basically schmidt brothers kit wouldn't work either. Based of what they show off their website is they sell an inline regulator? What I explained before is an adjustable inline regulator.

Previous to my 07 Phazer (which I haven't rode yet, except for going over the handlebars driving it backards off the back of a truck!) for a trail sled I had a 03 f7. They had the same kinda mod for the F7's but it cost alot less. Basically It was a 0-50 gauge, a 5/16" tee, and a inline...