Search results

Amsoil synthetic in my winder and my Apex before that, problem free.

This happened to me, oil filter gasket.

I have been on so many sleds and yes there are gremlins in these sleds but all the negative thoughts go away once you squeeze that throttle. Not to mention I like to do a little wrenching. I would and will buy another one of these monsters again.

OK, hopefully you get some snow up there soon.

So you are saying I should soften my skis up some and increase my back ride height?

Still having issues getting this sled dialed in. I am 250lbs with gear and have already added ski pressure by adjusting front skis as well as pulled the limiter strap down one hole. My torsion springs are all the way hard. Any suggestions to get a good ride and not have ski push while cornering?

Hoping to ride in Sudbury in 2 weeks, does anyone know what the trails are like right now?

I found a coolant leak on the 'T' joint just above and to the left of the oil filter on the hose clamps. They were very lose (all three of them). I turned them so I can easily get my 6mm socket on them.

Ok great, thanks for the info.

Can the wedge be installed with everything in place on the sled?

Get the screws on the chain tensioner tack welded, they have been known to back out.

I did not read all the post but I would certainly delete the ROV as mine froze in Hearst, and Also tack the two screws with weld on your chain tensioner. Read Dan's sled build, you will find all you need to do!

Make sure everyone knows to do this simple fix. I know of two guys that destroyed their chain cases because of this. IT'S A NO BRAINER!!

Get 24 to have some spares, they are worth having around.

Ok thanks, I will give them a call.

Anyone have a suggestion as to where in Ontario I should get my side hood panel welded?

Thanks for everyone's help, she's in place and buttoned up.

Ok, I figured that. I just was having difficulty with the spring pushing the small end down to rest against the case. Any tricks there?

How do I get that chain tensioner back in the case with everything installed? I had the screws tacked but I am wondering how to install, any tips? Thanks in advance.