Search results

I have a 1.75, using 9t extros. No problem with the tunnelprotectors removed.

:Rockon: :Rockon: :Rockon:

30000SEK is 4687$ But to get the actual price in USA you have to contact your local distributor.

Im not dissapointed at all! This sled is what everyone wanted last year, and now that its here all we hear is complaints. I think they have done the right thing with dealing with the minor things that is not so good on the 08 Nytro. Frontend geo and tunnel.

The Picture of the RTX must be a 09, completely diffrent tunnel! I want my tunnel to look like that!!! I dont like the wide runningboards on my 08 rtx at all! For offtrail riding that is. I wonder how expensive a new tunnel would be???

I have no tunnelprotectors on mine. Using a 1,75" track and 9t extros. As long as the track is not studded it will be fine.

Phazer has the same problem with the bushings in the upper a-arms. Or even worse.

Hey guys, try lifting the front end up and rock your spindles back an forth. The bushings in the upper a-arm wear out pretty qickly. That might be the reason you are getting diffrent measurements.

1.75" is 44mm. You really need to remove the protectors in the tunnel. When my dealer installed my track and drivers, they grinded the protectors down to about 5mm thick in the front. Track still rubbed them and left marks in the luggs. Just remove them, UNLESS you are planning to stud yor track.

I have a 1,75" track on mine. You need to remove the tunnelprotectors, both on the radiator and in the tunnel.

That would be a good idea, as they are totally dry from factory.

I am planning to replace all the bushings where the A-arms are mounted to the frame, for something better. I had a Phazer FX last year, and those a arm bushings were totallly worn out after one season of riding. I dont think we need to reinforce the front end, we need to get rid of all the...

I noticed this on mine today too. And the bushing in the lower a-arm has a lot of vertical slop, at least 3mm. Talked to my dealer today, bringing it in on monday.

Is it the same with whalbros wheels to? Or just Doo? I have some vibrations from my track after installing Whalbros extros and a 1,75" track. Im not sure if my dealer was aware of these arrows when they installed them.

The chaintensioner did the same thing on mine and two other RTXs the other day.

My locking nut had come loose last time i rode the sled. The bolt had unscrewed it self about 10mm. Oil has leaked between the chaincase and the bolt, ending up on the brakedisc and created quite a mess. Tightened the chain on the trail, and now i have a loud whining noise from my chaincase...

Or you could support the guys that help us get our sleds to performe better!

I can second what sniperviper said about the mountain skis, had them on my Phazer last year. They are defenetly dangerous in some conditions. But in powder or on a lose trail, they rock in my opinion. I have the powderhounds now on my FX Nytro and they are Kind of the opposite from the...

The Yamaha prototype racer that was raced in 05-06 here in sweden had coolant through the handlebars! Picture of the sled:

I think the heat is coming out throgh the holes in front of the foot. Theese pictures are taken at the end of a day of riding last week. The first one is just to show what conditions i was riding in. The second one is the right runningboard wich is covered with snow. The last one is of the...