nytro

2008 Nytro XTX two years ago on a Michigan UP trip the sled started stumbling, back firing, would lose power and die on the trial. Wouldn't start right back up but would after a few minutes with an engine miss. Was able to limp back by repeating the dying and restarting process many times and...

Wondering if anyone can help with what to run for Springs, Weights and Helix Degree when riding at sea level and also the set up for the mountains. I bought the DYTA-2 (79-86.4) Dalton quick adjust weights. Currently have it fully loaded at elevation. Any help would be appreciated.

Hey everybody. I bought this sled not too long ago and i am feeling like something is off with the sled. It is a 08 nytro mtx 40th edition, timbersled slid with stock rails extended to 162 with a powerclaw 2.25. I dont know drivers or tooth count or anything. Its got a mpi turbo running about 6...

Hello, I recently bought a 2008 Yamaha Nytro FX. I'm currently looking for some weight reduction options, I would love to find some Carbon Fiber parts for the nytro, such as idler wheels and other suspension components. Any recommendations?

Start. Check engine light yellow ON. Shut off. Check codes. 61 = 00 (no codes) but 62 says 1 (code)... what in the F!? Can't clear the 1. Check engine light stays on. It's intermittent and only comes on at idle, goes into limp mode, have to blip the throttle and if it doesn't die it takes off...

I have a 2008 Nytro RTX (Anniversary edition). When I quickly let off the throttle after having it wide open, the cluster flashes Er_1 and then the sled shuts off for a second or two and then comes back to life on its own. The sled only loses power and flashes Er_1 in that one specific scenario...

Hi, have a 2011 Nytro XTX and looking to invest in a clutch kit. Sled is fully stock expect a ULTRA Q muffler. Am around 170 pounds & trail ride mainly. Have heard great things about the Schmidt Bros Stage 2 kit that Chris offers, tried to contact Ulmer and no reply. Looking for opinions on...

Hi, need cheap alternative center shock replacement. I had found a shock from a 2006 Apex MTX, that is 13-1/4" eye to eye. Would that fit? Or should I go with this one? https://www.royaldistributing.com/sports-parts-inc-rear-gas-suspension-shock-su-04016.html I have the 2008 Nytro MTX 153" 40th...

Looking to purchase a power up kit for my 2011 Nytro XTX or the parts to make one. I see Hurricane does not offer the kit anymore and Hindle does not offer the exhaust anymore either. Looking for ideas on other alternatives that people have made work! The pc5, air breathers, won’t be an issue...

Hey guys, i have searched through this whole website and haven't found exactly what i need for information, i have a 2014 mcxpress 270 turbo yamaha nytro mtx se with a 153x2.5 challenger extreme track with 20/40 gearing that i have spent a ton of time trying to tune these clutches and have yet...

Hey everyone im new here on Ty4strokes, just thought id post my build and give my opinion on some of the best upgrades i have done. ✅ is the absolute best mods 2014 yamaha nytro mtx se brand new 0km bought in November 2019 Istalled: -handlebar riser and oft relocation ✅ -Mesh vent covers...

Hello I just removed my chain case cover. I noticed the lower larger spring and bushing fell out. Cannot seem to get them to stay it it continues to pop out. Not sure if I’m missing something. (First time rookie) any help would be appreciated before I reassemble

Hello everyone I recently picked up a 2009 Nytro XTX. Looking to do some maintenance before the snow hits. I ordered plugs/oils but I’m really looking for some help with the undercarriage I’m in search of all the bearings for the wheels. 3 of my outside idlers spin rough. Any help would be...

So this march I was out riding when it was warm, cruising up a hill and I heard two loud clunks so I stopped looked over the belt and track couldnt see any issues. went up a little further it goes clunk clunk and stalls. looking around I realized the track had melted to the rails and so I...

Ok so i have an 06 nytro and can not for the life of me fuiger out why i have no spark. I have tried to. The tors. Stator tests good. I have voltage to the coils. And tried 2 sets of coil. Kill switch seems good ignition seem to be good. I have just changed the flywheel to. One with a good one...

Hey guys I have a 2007 Yamaha Nytro with the 973 (Genesis 120) engine and I am looking to install a 2009 Genesis 130 FI engine in it. I did some research and the 120 and 130 share the same block, except the 130 is bored out larger (1050cc) The 120 has a cracked block. Is it is simple as...

Im looking for a front end i found from a guy, which is a standard mtx front end (brand new) from yamaha for my nytro. Im just wondering what these front ends are going for? he said he wanted 400 for i, +150 for the suspension, what would you have bought it for? Thanks.

Hey guys. I got a nytro rtx 2009 which is build to 144inch track, bu I will soon build it to 154inch. So I think my steering sits kinda low when standing (I havent driven it yet) and there is currrently a 4inch riser on it. I was thinking of putting on a 5 or 6 inch riser, any suggestions? Im...

I’ve got an 09 nytro that I can hit the key and it will start right up for a few seconds then quit. If I hold the key in the crank position it will stay running until I let the key return to the run position! I’ve been all through this thing and just seeing if maybe anyone can help me out. Thanks

Hey! I just bought myself a nytro rtx, extended to 155 and I wonder if any of you have a skinz seat for sale? Im really looking for this seat, and hope to find one I can buy for a decent price. I live in Norway, so I hope the shipping won't be super expensive.