MarkRTX
Expert
Went back to running stock thinking my PC3 might have some issues and run quality was good for awhile but to my surprise it had some hesitation after hard pulls and off and back to hard pulls on the trail. Had pod set at 12 for my ram air lid so ran close to empty fueled up ran great for a bit and again during slow speed it would spit and sputter and almost stall come out of it and be fine then stopped adjusted down to 10 like last year still did it a couple times but not as often but still did then next day of riding adjusted to 7 on pod and ran ok maybe only once or twice next day. Can adding to much fuel down low cause this or what? 
Starting to piss me off a bit I use FI cleaner and seafoam so where do I start and I had the relay problem for the first time ever this weekend don't know why this is my second Apex and never had this problem. Thanks for any and all help
Starting to piss me off a bit I use FI cleaner and seafoam so where do I start and I had the relay problem for the first time ever this weekend don't know why this is my second Apex and never had this problem. Thanks for any and all helpMarkRTX
Expert
ANY IDEAS????
kinger
VIP Member
- Joined
- Jan 17, 2005
- Messages
- 7,403
- Reaction score
- 1,539
- Points
- 1,963
- Location
- Clear Lake, IA
- Website
- www.piergenius.com
Original plugs?
Sounds like a fuel regulator but that sled is too new for it to fail.
How many miles on the sled?
Sounds like a fuel regulator but that sled is too new for it to fail.
How many miles on the sled?
MarkRTX
Expert
New cr10 plugs Maybe a loose connection with one of the plugs. only 2300 miles on it
MarkRTX
Expert
Need help guys want to ride this weekend. Anyone ever have issues with the cr10 plugs? New this season may take ram air lid off and put back to stock and see how it runs. Maybe my fitch fuel catalyst screwing things up in the tank???? Need help asap Thanks
MarkRTX
Expert
TTT
