MarkRTX
Expert
Went back to running stock thinking my PC3 might have some issues and run quality was good for awhile but to my surprise it had some hesitation after hard pulls and off and back to hard pulls on the trail. Had pod set at 12 for my ram air lid so ran close to empty fueled up ran great for a bit and again during slow speed it would spit and sputter and almost stall come out of it and be fine then stopped adjusted down to 10 like last year still did it a couple times but not as often but still did then next day of riding adjusted to 7 on pod and ran ok maybe only once or twice next day. Can adding to much fuel down low cause this or what? 
Starting to piss me off a bit I use FI cleaner and seafoam so where do I start and I had the relay problem for the first time ever this weekend don't know why this is my second Apex and never had this problem. Thanks for any and all help
Starting to piss me off a bit I use FI cleaner and seafoam so where do I start and I had the relay problem for the first time ever this weekend don't know why this is my second Apex and never had this problem. Thanks for any and all help
