dylanjen9
Expert
Will a 1.5” track fit on a 2011 apex 128” with the tunnel protectors. It looks pretty tight where the tunnel protectors start can they be left in or should I remove them?
- Joined
- Jun 1, 2004
- Messages
- 7,837
- Reaction score
- 2,037
- Points
- 2,103
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
put one in my 11 xtx without removing anything.
kinger
VIP Member
- Joined
- Jan 17, 2005
- Messages
- 7,408
- Reaction score
- 1,546
- Points
- 1,963
- Location
- Clear Lake, IA
- Website
- www.piergenius.com
Worked on mine as well. No mods. I noticed they were a little black but never heard anything and track looked fine.
VX1R
Lifetime Member
- Joined
- Sep 19, 2004
- Messages
- 2,286
- Reaction score
- 4,723
- Points
- 1,603
- Location
- Inver Grove Heights, MN
- Country
- USA
- Snowmobile
- Ordered: 2025 SW LTX-LE Final Edition
Current Riders:
2018 SW LTX-LE
2002 SRX Custom
Rough Trail: 2023 Lynx Xterrian 900TurboR
Vintage Riders:
1980 Enticer 300 Twin
1986 Inviter
1998 Phazer Mt. Lite
1996 Phazer Mt. Lite Mod
I would suggest removing the tunnel protectors. Back in the day I installed a 1.5-in lug track on an Apex and left the tunnel protectors in initially. There was not a whole lot of clearance but it worked. The issue I had is the tunnel protectors especially towards the front of the sled seem to collect a lot of ice build up that would wear down the track lugs prematurely. After I noticed the constant ice build up I pulled the protectors out. Better safe than sorry. Hopefully this will help.
