136" X 10.5 on Apex Stock suspension Please Help.

[switchback1080]

I am going to attempt to mount the track on the stock suspension. Have or does anyone know how to do this?? Maybe it could save me some time. just trying to figure this all out.

 

[monker]

When I started out I used the stock pro-action from my warrior. For the top idler wheels I ended up cutting the arm where the shaft goes through to move the wheels in. Then I made aluminum spacers to take up the room on the outside. Careful doing this though as it moves the wheels directly above the bump stops.


With the stock apex 136 monoshock you should just be able to make a new cross shaft with the wheels closer. Just verify all of your clearances before running it.

 

[switchback1080]

I have the torsion springs to be concerned of though. I was thinking of removing the top idlers and ordering a bolt on shaft from wahl called a upper track ride wheels. it sounds like it would work.

 

[monker]

yes, sounds like that could work too. I assumed you were using a 136 monoshock out of an attack.

 

[switchback1080]

No I stretched my apex RTX to a 136". So I still have the torsion springs.

 

[jkenosh]

i guess we will see, i was lucky and got a used 15 for mine, waiting 4 it to get here

 

[rolo]

stock suspension

I have a 136 suspension that I have a 10.5 asphalt track on. I have run it in the 8.50s at 160mph. It is off a 2004 warrior. I can send you pics if you would like to look at how I modified it?