SnoGasm
Newbie
Does anybody have steps on how to do this Pics would work to.
Ruckus
TY 4 Stroke Master
You have to remove:
1. Seat
2. Headlight
3. Gas tank cover
4. Gas tank
5. Plugs
There is a fuel line that runs to the injectors with a red clip that you have to undo. There are 2 lines from the tank, a gas line and a vapor return line. There are several connectors for the ignition and whatnot. Just pull out the tank a bit and you'll see. Take photos of every step and lay out your parts well so it is easy to reassemble. If you are as far as your plugs, check the heat shielding over the exhaust and your exhaust gaskets and clamps. Its only 3 screws on the silver cover marked HOT to see it all.
1. Seat
2. Headlight
3. Gas tank cover
4. Gas tank
5. Plugs
There is a fuel line that runs to the injectors with a red clip that you have to undo. There are 2 lines from the tank, a gas line and a vapor return line. There are several connectors for the ignition and whatnot. Just pull out the tank a bit and you'll see. Take photos of every step and lay out your parts well so it is easy to reassemble. If you are as far as your plugs, check the heat shielding over the exhaust and your exhaust gaskets and clamps. Its only 3 screws on the silver cover marked HOT to see it all.
spike337
TY 4 Stroke Master
I don't think the Stickys are 'named' so a guy has to pick around and open each one to see what's in it. Maybe it's just me not understanding a computor, but last i looked i felt they should have a name or a title added.
- Joined
- Nov 1, 2009
- Messages
- 3,564
- Location
- Winnipeg, Manitoba
- Country
- Canada
- Snowmobile
- 2009 Phazer RTX
Like Ruckus said.
There are also 2 things to disconnect on the front side(engine side) of the gas tank. I usually leave the vent line on and set the tank to the left side of the sled on a chair or something.
There will be 2 black things on the engine Unplug the wires and remove the bolt and pull the ignition coils off, it will take some force but take it easy and careful they are fragile.
The spark plugs are way down in there, use the tool that came with the sled with the rubber thing inside that holds the plug.
Good luck!
There are also 2 things to disconnect on the front side(engine side) of the gas tank. I usually leave the vent line on and set the tank to the left side of the sled on a chair or something.
There will be 2 black things on the engine Unplug the wires and remove the bolt and pull the ignition coils off, it will take some force but take it easy and careful they are fragile.
The spark plugs are way down in there, use the tool that came with the sled with the rubber thing inside that holds the plug.
Good luck!
SnoGasm
Newbie
Looks like its about the same stuff I had to remove to put the front tunnel closer kit on. Thanks
