2008 Nytro Head light issue

[tamkyo]

Hi Guys

Both bulbs in my 2008 Nytro do not have low beam but do have high beam. I thought although unusual, maybe both bulbs burnt on the low beam side but when I replaced one buld last night, the low beam still would not work on the new bulb but the high bean still functioned fine on both bulbs.

Any idea what may be causing the sled to have no low beam and where to start to try and fix it?

Anybody else run into this problem?

 

[raginyamaha]

pop a fuse maybee?? i think low and high have seapate fuses, ill have to check the manual...

 

[SteelerJim]

It could be the switch

 

[natedawgedog]

there is one headlight fuse its a 20a fuse so if your high beams are working I wouldnt think the fuse would be blown, it takes a couple min to take one of the lights out, check to see if the low beam filliment's are burnt out. if they appear to be good check the high/low switch

 

[tamkyo]

Hi Nate.....

I already switched one of the bulbs in the sled with a new one and still did not get any low beam out of the new bulb.
I will try and see if there are two fuses but the switch for the high beams operates without issue.

Thanks for everyones help....any other suggestions?

 

[SteelerJim]

Just because the switch is working for the high beams doesn't mean that it is on the low side. I would bet that the switch is bad.

 

[tamkyo]

Ok I will replace the switch and hope that fixes the problem. I will let you know.

Thanks Again

 

[09nytro]

Its not the switch...Its the headlight relay

My sled did the same thing last year...its the group of relays in the front