2009 Vector Secondary Clutch

Cdombro

Newbie
Joined
Jan 3, 2024
Messages
12
Reaction score
0
Points
31
Location
Wisconsin
Country
USA
Snowmobile
2009 Yamaha Vector Ltx Gt
Secondary clutch has big gap, not sure what is causing this. Could it be a wrong bolt or a spacer. If someone has an idea, that would be great.
 

Attachments

  • 1767233404525.png
    1767233404525.png
    280.8 KB · Views: 58
Mine has 2 spacer behind the clutch and just one thin one on the out by the bolt, I have around 1/4 inch of play total after it has been tightened.
 
Mine has 2 spacer behind the clutch and just one thin one on the out by the bolt, I have around 1/4 inch of play total after it has been tightened.
You don't happen to have a picture of this do you?
 
I can get you a picture tomorrow afternoon.
 
You don't happen to have a picture of this do you?

Are you positive the big spacer that goes over the bolt is seated all the way in there?? They can catch, I've had it happen & when ya tighten the bolt it looks exactly like what you've got going on there.
 
Are you positive the big spacer that goes over the bolt is seated all the way in there?? They can catch, I've had it happen & when ya tighten the bolt it looks exactly like what you've got going on there.
I don't think it is catching I have play with spacer and the bolt could never get it to go down any further than that I believe I'm missing a spacer behind the clutch but also not sure if there is one behind it
 
This is my 09
 

Attachments

  • IMG_4464.jpeg
    IMG_4464.jpeg
    79.2 KB · Views: 39
  • IMG_4463.jpeg
    IMG_4463.jpeg
    89.4 KB · Views: 36


Back
Top